Hybrid Amplifiers
We offer a wide range of hybrid amplifiers of full metal body. These amplifiers are of supreme quality and it is very cost effective also. It gives single output of 550/750/860 MHz.
The technical specifications are :
Frequency response - 0.5 db
Maximum gain - 32 db
Monitor - 20 db
Gain control - 0-20 db
Slope control - 0-20 db
Noise figure - db typical
Line Hybrid Amplifier
This hybrid amplifier is of full aluminum metal body. We offer these amplifiers of superlative quality and they are very highly efficient also. It gives single output of 550/750/860 MHz.
The technical specifications are :
Frequency response - 0.5 db
Maximum gain - 32 db
Monitor - -20 db
Gain control - 0-20 db
Slope control - 0-20 db
Noise figure - 6.5 db typical
Output Hybrid Amplifier
This dual output hybrid amplifier is made up of fully aluminum body. These amplifiers are made up of first rate quality raw material.
The technical specifications are:
Frequency response - 0.5 db
Maximum gain - 32 db
Monitor - 0-20 db
Gain control - 0-20 db
Slope control - 0-20 db
Noise figure - 6.5 db typical
Dual Output Hybrid Amplifier
The dual out put hybrid amplifier has a fully metal body which is made up of high quality keeping with compliance of all the norms.
The technical specifications are :
Frequency response - 0.5 db
Maximum gain - 32 db
Monitor - -20 db
Gain control - 0-20 db
Slope control - 0-20 db
Noise figure - 6.5 db typical
CATV Splitters/TAP OFF
It is suitable for 5~2500MHz system single-directional or bi-directional network transmission system. Adopt resistance and capacitance mount component and zinc-alloy organic whole. Shell surface plating Sn-Ce and nether cover using Sn, makes waterproof performance very good. These splitters are designed for even distribution of CATV signals it features an internal impedance matching network for accurate load to all your outputs.
Optical Receiver (Node)
Optical node is designed to meet the requirements of modern HFC networks. Adjustment of the optical node has been simplified due to its microprocessor control unit that enables uninterrupted adjustment (e.g. AGC, slope, gain), what is extremely important especially for modern services e.g. VoIP, VoD.
This solution allows reducing costs of network maintenance, eliminating the necessity of plug-in modules stock and simplifying installation and adjustment of the device.
The technical specifications are :
Complete range of optical nodes
We offer nodes comprises of single and dual output
It has pin diode/ module IC
It gives output of 550/750/850 MHz
Adjacent Channel Modulator
We offer cost effective adjacent channel modulator which is of unmatched quality. It is highly durable and is very easy to install. It is also resistant to corrosion. It has gain output of 110db and has audio aural carrier of 20db.
Bi-Directional Power Supply
This Bi-Directional power supply unit is very cost effective and of very high quality. It is very durable and easy to install.
The technical specifications are :
It has output voltage of 60-110v.
The output current is 3/6/10/12/15/25 Amp
The output port is 2/3/4 port
SMPS Power Supply
It is made up of high quality, with having good variety of connectors. It also offers silent operation.
The technical specifications are :
It is having capacity of 1 Amp
The input voltage comes around 100-300v
The output voltage is 7.5v/ 9v/ 12v
Channel Trap
This channel tape is very easy to install. It is highly durable and it is resistant to heat and corrosion.
The technical specifications are :
CH-2 : 48.250
CH-2/3 : 48.250-55.250
CH-2/3/4 : 48.250-62.250
CH-2/3/4/5 : 48.250-105.250
Cable T.V. Accessories
We have a wide range of the cable TV accessories
Tapoff,splitters,powersupply,coaxial cable,dish,digitalsatellite reciever ,CATV transmitter,C-band LNB,Fibere optical wires,F type connectors ,RG59,RG 6,RG 8,RG 10,RG11,500 series coneectors,DB meter,TRANSMITTER node,patch cords/coupler adaptor, Joint incloser (Bamboo),POWER SUPPLY 6amp 10amp 15amp, DE Modulator,ADAPTOR(3v-12v) Mobile charger,Tool Kit,Attenuators.which is in compliance of all the requisite norms and the standards. Our accessories are made keeping in mind of the rapid ally changing technology. These cable TV accessories are even made according to the technical specifications and details provided by our valued clients and are delivered within the specified period of time.
CATV Splitter
We are leading manufacturer and supplier of communication equipment such as splitters and CATV splitters. These splitters are designed for even distribution of CATV signals it features an internal impedance matching network for accurate load to all your outputs.
We offer a wide range of hybrid amplifiers of full metal body. These amplifiers are of supreme quality and it is very cost effective also. It gives single output of 550/750/860 MHz.
The technical specifications are :
Frequency response - 0.5 db
Maximum gain - 32 db
Monitor - 20 db
Gain control - 0-20 db
Slope control - 0-20 db
Noise figure - db typical
Line Hybrid Amplifier
This hybrid amplifier is of full aluminum metal body. We offer these amplifiers of superlative quality and they are very highly efficient also. It gives single output of 550/750/860 MHz.
The technical specifications are :
Frequency response - 0.5 db
Maximum gain - 32 db
Monitor - -20 db
Gain control - 0-20 db
Slope control - 0-20 db
Noise figure - 6.5 db typical
Output Hybrid Amplifier
This dual output hybrid amplifier is made up of fully aluminum body. These amplifiers are made up of first rate quality raw material.
The technical specifications are:
Frequency response - 0.5 db
Maximum gain - 32 db
Monitor - 0-20 db
Gain control - 0-20 db
Slope control - 0-20 db
Noise figure - 6.5 db typical
Dual Output Hybrid Amplifier
The dual out put hybrid amplifier has a fully metal body which is made up of high quality keeping with compliance of all the norms.
The technical specifications are :
Frequency response - 0.5 db
Maximum gain - 32 db
Monitor - -20 db
Gain control - 0-20 db
Slope control - 0-20 db
Noise figure - 6.5 db typical
CATV Splitters/TAP OFF
It is suitable for 5~2500MHz system single-directional or bi-directional network transmission system. Adopt resistance and capacitance mount component and zinc-alloy organic whole. Shell surface plating Sn-Ce and nether cover using Sn, makes waterproof performance very good. These splitters are designed for even distribution of CATV signals it features an internal impedance matching network for accurate load to all your outputs.
Optical Receiver (Node)
Optical node is designed to meet the requirements of modern HFC networks. Adjustment of the optical node has been simplified due to its microprocessor control unit that enables uninterrupted adjustment (e.g. AGC, slope, gain), what is extremely important especially for modern services e.g. VoIP, VoD.
This solution allows reducing costs of network maintenance, eliminating the necessity of plug-in modules stock and simplifying installation and adjustment of the device.
The technical specifications are :
Complete range of optical nodes
We offer nodes comprises of single and dual output
It has pin diode/ module IC
It gives output of 550/750/850 MHz
Adjacent Channel Modulator
Bi-Directional Power Supply
This Bi-Directional power supply unit is very cost effective and of very high quality. It is very durable and easy to install.
The technical specifications are :
It has output voltage of 60-110v.
The output current is 3/6/10/12/15/25 Amp
The output port is 2/3/4 port
SMPS Power Supply
It is made up of high quality, with having good variety of connectors. It also offers silent operation.
The technical specifications are :
It is having capacity of 1 Amp
The input voltage comes around 100-300v
The output voltage is 7.5v/ 9v/ 12v
Channel Trap
This channel tape is very easy to install. It is highly durable and it is resistant to heat and corrosion.
The technical specifications are :
CH-2 : 48.250
CH-2/3 : 48.250-55.250
CH-2/3/4 : 48.250-62.250
CH-2/3/4/5 : 48.250-105.250
Cable T.V. Accessories
We have a wide range of the cable TV accessories
Tapoff,splitters,powersupply,coaxial cable,dish,digitalsatellite reciever ,CATV transmitter,C-band LNB,Fibere optical wires,F type connectors ,RG59,RG 6,RG 8,RG 10,RG11,500 series coneectors,DB meter,TRANSMITTER node,patch cords/coupler adaptor, Joint incloser (Bamboo),POWER SUPPLY 6amp 10amp 15amp, DE Modulator,ADAPTOR(3v-12v) Mobile charger,Tool Kit,Attenuators.which is in compliance of all the requisite norms and the standards. Our accessories are made keeping in mind of the rapid ally changing technology. These cable TV accessories are even made according to the technical specifications and details provided by our valued clients and are delivered within the specified period of time.
CATV Splitter
We are leading manufacturer and supplier of communication equipment such as splitters and CATV splitters. These splitters are designed for even distribution of CATV signals it features an internal impedance matching network for accurate load to all your outputs.
